The resin nut of the rolling slide screw uses PPS as the base material and employs special resin with solid lubricant (such as fluororesin)added to improve the sliding property.
Material more excellent in sliding property, heat resistance and water absorbency as compared to polypropylene, nylon and polyacetal.
Has lower noise as compared to ball screws and lightly slides with lower torque as compared to trapezoidal screws.
ข้อมูลสินค้า
Nominal diameter D1 (mm) : 12
Lead (mm) : 2
Total Length L (mm) : 400
Initial lead error : ±0.21/300mm (base temperature : 25°C)
Bending accuracy : Within 0.16mm
วัสดุ
Screw shaft : SUS304
Nut : Sliding PPS resin
อุปกรณ์ในกล่อง
PPS nut x 1
น้ำหนัก
332 g
คำเตือน
The position reproducibility varies with friction due to use or part replacement at the time of maintenance.
When using grease, molybdenum and silicone grease cannot be used.
Absolutely refrain from using such grease since it may cause trouble to the nut.
The base temperature for the sliding property is 25°C. The property may vary due to difference in temperature.
Since the nut uses PPS as the base material, it may crack or deform due to impact or excessive tightening.
YAHATA
